高居里温度铁电单晶PIN-PT的机电性能

弛豫铁电单晶Pb(In_1/2Nb_1/2)O₃-PbTiO₃(PIN-PT)相较于常用的Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃(PMN-PT)具有更高的居里温度,在高稳定性、高性能的传感器、换能器方面具有应用前景。本工作采用谐振法研究了[001]方向极化的0.66PIN-0.34PT铁电单晶的全矩阵机电性能参数。0.66PIN-0.34PT 单晶的三方-四方相变温度(T_RT)约为160 ℃,居里温度(T_C)约为260 ℃,室温压电系数d₃₃、d₃₁、d₁₅分别为1 340 pC/N、-780 pC/N、321 pC/N,介电常数ε^T₃₃、ε^S₃₃、ε^T₁₁、ε^S₁₁分别为2 700、905、2 210、1 927,机电耦合系数 k₃₃、k₃₁、k₁₅、k_t分别为 87%、58%、38%、61%。其纵向压电常数(d₃₃)和纵向机电耦合系数(k₃₃)小于 PMN-PT 单晶,但是横向压电性能(d₃₁)和剪切压电性能(d₁₅)都略高于PMN-PT单晶。另外,研究了机电耦合性能随温度的变化趋势,发现0.66PIN-0.34PT单晶在150 ℃以下有较好的温度稳定性。     

化学类拔尖学生培养与高校青年教师成长协同发展实践*

在高等教育大众化的背景下,通过教学改革培养高素质的拔尖人才已显得非常重要。介绍一种以新入职的青年教师为实施主体的“理论课助教+实验课教学+科研训练”相结合的教学形式。通过连续、跟踪式的教学,不但可以选拔、培养出拔尖的化学类本科生,而且能够促进新入职的青年教师快速成长进步,起到“教学相长”的作用。     

Nano-LC: An updated review

Low-flow chromatography has a rich history of innovation but has yet to reach widespread implementation in bioanalytical applications. Improvements in pump technology, microfluidic connections, and nano-electrospray sources for MS have laid the groundwork for broader application, and innovation in this space has accelerated in recent years. This article reviews the instrumentation used for nano-flow LC, the types of columns employed, and strategies for multidimensionality of separations, which are key to the future state of the technique to the high-throughput needs of modern bioanalysis. An update of the current applications where nano-LC is widely used, such as proteomics and metabolomics, is discussed. But the trend toward biopharmaceutical development of increasingly complex, targeted, and potent therapeutics for the safe treatment of disease drives the need for ultimate selectivity and sensitivity of our analytical platforms for targeted quantitation in a regulated space. The selectivity needs are best addressed by mass spectrometric detection, especially at high resolutions, and exquisite sensitivity is provided by nano-electrospray ionization as the technology continues to evolve into an accessible, robust, and easy-to-use platform.     

考虑地表反射类型的气溶胶散射偏振特性

采用逐次阶散射法求解矢量辐射传输方程来研究气溶胶在不同地表反射模型下的散射偏振特性.首先,选取单一地表反射模型和耦合地表反射模型两种地表反射模型.然后,根据地表反射模型计算得到相应的地表反射率,进而采用逐次阶散射法对矢量辐射传输方程进行求解,得到散射光的Stokes矢量.最后,由Stokes矢量计算得出散射光的偏振度.仿真结果表明,两种地表反射模型下气溶胶单次散射的散射辐射强度和线偏振度均相等;耦合地表反射模型的总散射辐射强度和线偏振度总是大于单一地表反射模型;单一地表反射模型的气溶胶单次散射相对总散射的贡献总是大于耦合地表反射模型.研究结果对气溶胶光学特性的反演具有一定意义.     

基于MCMC主成分回归分析方法的经济增长因素研究

将MCMC算法融合到主成分回归分析模型中,提出MCMC主成分回归分析方法.新方法既具有有效避免解释变量之间的多重共线性问题以及简化回归方程结构的主成分回归分析方法的优势,又能够充分利用MCMC算法的融合先验信息、模型信息及样本似然函数的长处.将方法应用于对嘉兴市1997年至201.0年的经济发展指标的数据建模分析,结果表明,方法能有效克服现有分析方法的不足,建立预测精度更高的模型.     

硫源和六元瓜环对硫化镉性质的影响

以硫代硫酸钠和硫脲为硫源,氯化镉为镉源,六元瓜环(Q[6])为修饰剂,采用水热法制备Q[6]/CdS复合光催化剂.利用傅里叶变换红外光谱、X射线粉末衍射和扫描电子显微镜对产物进行结构和形貌表征,考察Q[6]和硫源对产物结构和性能的影响.结果表明,硫源对产物形貌和结构都有影响,Q[6]对硫化镉光催化性能有增强作用,15 mg Q[6]/CdS能使50 mL,6 mg/L的次甲基蓝溶液反应200 min时的降解率达到93.0;以上.     

Nanosized Carbon Macrocycles Based on a Planar Chiral Pseudo Meta-[2.2]Paracyclophane

Structural designs combining cycloparaphenylenes (CPPs) backbone with planar chiral [2.2]paracyclophane ([2.2]PCP) lead to optical-active chiral macrocycles with intriguing properties. X-ray crystal analysis revealed aesthetic necklace-shaped structures and size-dependent packages with long-range channels. The macrocycles exhibit unique photophysical properties with high fluorescence quantum yield of up to 82 %, and the fluorescent color varies with ring size. In addition, size-dependent chiroptical properties with moderately large CPL dissymmetry factor of 10⁻³ and CPL brightness in the range of 30–40 M⁻¹ cm⁻¹ were observed.     

Shape morphing and topology optimization of fluid channels by explicit boundary tracking

An integrated shape morphing and topology optimization approach based on the deformable simplicial complex methodology is developed to address Stokes and Navier‐Stokes flow problems. The optimized geometry is interpreted by a set of piecewise linear curves embedded in a well‐formed triangular mesh, resulting in a physically well‐defined interface between fluid and impermeable regions. The shape evolution is realized by deforming the curves while maintaining a high‐quality mesh through adaption of the mesh near the structural boundary, rather than performing global remeshing. Topological changes are allowed through hole merging or splitting of islands. The finite element discretization used provides smooth and stable optimized boundaries for simple energy dissipation objectives. However, for more advanced problems, boundary oscillations are observed due to conflicts between the objective function and the minimum length scale imposed by the meshing algorithm. A surface regularization scheme is introduced to circumvent this issue, which is specifically tailored for the deformable simplicial complex approach. In contrast to other filter‐based regularization techniques, the scheme does not introduce additional control variables, and at the same time, it is based on a rigorous sensitivity analysis. Several numerical examples are presented to demonstrate the applicability of the approach.